Navigate

Roadpost Support Center

or
Contact Us
  • Get in touch

    Send us an email

  • Start a chat session

  • Knowledgebase Read help articles
  • Contact Us We are here to help
  • Portal
  • Knowledgebase
  • GeoPro
  • GeoPro Safety Wearable
  • How-To
  • Configuring Status Indicators for the GeoPro Safety Wearable
Subscribe Download PDF

Configuring Status Indicators for the GeoPro Safety Wearable

Lu Parente
2020-11-02
in How-To

Visual (LED) and audible (loud speaker) status indicators on the GeoPro Safety Wearable can be enabled and disabled using the GeoPro Web App as desired. LED illumination and voice prompts can be silenced for discrete operation however both cannot be disabled at the same time.


Follow the instructions below on how configure the visual and audible status indicators for the GeoPro Safety Wearable using the GeoPro Web App.


1.  Navigate to the Devices tab and select the desired GeoPro Safety Wearable device from the list.

2. The device page for the selected device will be displayed, select Configure from the list.

3. The device configuration page for the selected device will be displayed, select Status Indicators from the list

4. Using the options, select the desired Status Indicators setting from the drop-down. Press Send when finished.

Note: Both LED illumination and loud speaker cannot be disabled simultaneously. Changes made from the portal are not permanently stored. Settings will be retained on the device but not reflected in this menu.

5. When the Wearable receives the command to change status indicators it will play a verbal “Remote configuration received from portal” message. The selected status indicator settings will now be reflected on the device.

Rate the quality of this page

This page was helpful :) :( This page was not helpful

Quick Jump
  • Roadpost Support Center
  • Knowledgebase
  • Contact Us
Top
Helpdesk software provided by Deskpro