The GeoPro Safety Wearable is a standalone cellular pendant capable of SOS, Fall Detection/Man Down, Tracking, Check-In and two-way voice communication with GEOS 24 x 7 SOS response, all controlled though the device’s single, multi-function button.
Use the quick reference table below for assistance on how to use the GeoPro Safety Wearable.
Note: After triggering any of the device features using the appropriate button taps, please give the device a second to acknowledge the key sequence. This is by design to prevent the device from triggering the incorrect feature as you progress through the button taps.
Hold 5 sec. | Power On |
1 tap | Power Status |
2 taps | Check-In |
3 taps | Start Check-In Session |
4 taps | Stop Check-In Session |
5 taps | Battery/Signal Check |
6 taps | Power Off |
Hold 3 sec. | Declare/Cancel SOS |
For additional details on any of the above, select the related article from the list:
➜ Starting & Stopping a Check-In Session
➜ Checking Battery, Cellular Signal & Wi-Fi Connectivity
➜ Declaring & Cancelling an SOS
➜ Configuring Status Indicators
➜ Charging your GeoPro Safety Wearable
You can also find helpful information about the GeoPro Safety Wearable in the following guides:
➜ GeoPro Safety Wearable Quick Start Guide
➜ GeoPro Safety Wearable Manual